All posts by Zalmen Pollak

Repair or Replaces Appliances: Which is Better?

Appliances Repair

When our valuable, pricey home appliances stop working or functioning as it should, homeowners are left in the dilemma of whether to get a new one or replace.  A dishwasher that has stopped spinning, a washing machine that doesn’t fill at all, a dryer that overheats. Different things can go wrong with our appliances and they can sometimes break down even before their lifespan expires. Hence, instead of investing in the replacement of a malfunctioning appliance, all you sometimes need is to call in a microwave repair in New City NY or refrigerator repair in New City NY to the appliance function like brand new. Plus, you get to save huge bucks on other necessities. To replace or to repair? Here is an expert take on whether to call in an expert for repair or head over to the store. 

Determine if it is worth putting in the heavy bucks on a replacement

One of the quickest ways to determine if you should go for a replacement or repair is to adopt the 50% rule. This means if an appliance is more than 50% of its lifespan and the cost of repair is also around  50% of the cost of upgrading into a new one. Replacement might be your best bet. 

Although age is an important element, we have, however, seen some appliances in grandmother’s kitchen that are still working well for decades while the 4-5-year-old one got tossed out. Many companies are more into making profits than making products that are durable. However, if the cost of repair tends to be almost the same or more than half of replacement, you might as well go for a replacement. 

Know the appliance life span

The National Association of Home Builders study has made things easier by giving a rough estimate of the expected lifespan of major appliances. Use this to determine how far gone your appliance is in its lifespan and if you should repair or check out for upgrades. You probably don’t want to spend $300 dollars on a microwave that is already 7 years old. 

Air conditioner: 15 years

Dishwasher: 9 years

Dryer: 13 years

Furnace: 15 to 20 years

Garbage disposal: 12 years

Microwave: 9 years

Refrigerator: 13 years

Stove: 13 to 15 years

Washer: 10 years

Water heater: 10 to 20 years

Understand the type of appliance problems that might need repair or replacement

1. Oven 

Repair: you need an expert in Oven repair in New City NY if the oven won’t heat, the light burner won’t turn on or the door won’t shut. 

Replace: if the insides are rusting or the glass door has cracked. Getting a glass door can be difficult and expensive.

2. Stoves

Repair: call in a stove repair in New City NY if you notice inconsistent temperatures, or can’t adjust the heat of the electric stove. 

Replace: if the tempered glass stove has a crack, or the control panel isn’t working. The control panel is one of the most expensive parts and it will better to get a new stove rather than replacing the part. 

3. Washing Machine

Repair: consider repairs if the washer leaks, there are draining problems, or it’s making funny noises

Replace: If the washer won’t spin. Better to get a new one as repair requires the dismantling of the appliance which can be expensive. 

4. Refrigerator

Repair: if the freezer unit is freezing too cold, there is a puddle of water around the fridge, or it is overheating. 

Replace: If the compressor isn’t running. It cost a lot to replace the compressor, instead get a new refrigerator. 

While at it, it is important to understand the place of constant maintenance in ensuring your appliance function optimally and last you for years. Appliances are like cars, if we are not paying them attention with proper maintenance, they can break down.

Still don’t know how to go about it? Call in an expert!

Do you need to rinse your dishes before putting them in the dishwasher?

Rinse Dishes before putting in the dishwasher

Should you rinse dishes before the dishwasher? This is one of the hotly debated issues among many homeowners. While many are strong believers in pre-rinsing plates before dipping into the dishwasher, some think you are not allowing the dishwasher to carry out its job when you pre-rinse.

If you are among the first set of homeowners who are raised to believe you have to rinse the plates before putting them in the dishwasher, sorry to burst your bubbles. You have been doing it all wrong! And No, there is absolutely no reason to pre-rinse your dear plates and utensils before washing. Here are expert reasons to stop you from pre-rinsing your dishes before loading them in the dishwasher ever again. Keep reading!


Pre-washing is a waste of time, water, and energy

Put simply, when you rinse dishes before the dishwasher, you are wasting time, water, and energy. For one, the average dishwasher is more water-friendly than traditional handwashing. Plus, it is energy efficient. Using the energy star dishwasher saves you 5,000 gallons of water, hours of labor, and a reduction in utility bills. 

Then, if you have to run a full blast of water on your dishes in the name of rinsing, this doesn’t justify any claim about the dishwasher being water and more energy-efficient than hand washing. Coupled with the fact that time and energy are going into the rinsing. Why not let your dishwasher do the heavy lifting, while you focus on other important things. 


Pre rinsing is only doing more harm than good to your dishwasher

When you pre-rinse, you may be doing more than good to the dishwasher. This is because dishwashers work with sensors that detect how dirty your plates and will run a thorough cleaning cycle to get them cleaned. If however, you rinse the dishes first before loading, the sensor is being fooled into thinking your plates don’t need much cleaning as it won’t pick up any food particles. Hence, the dishwasher will run less efficiently with less cycle and likely leave some food residue behind. That’s the last thing you want. 

 This shows that the extra effort put into cleaning does not get the job than using the innovative dishwasher alone. 


Why bother, let the dishwasher do its job

The dishwasher is made for just that- to wash the dishes. And the good thing is the detergent is designed to cling to the food articles to the dishes cleaned effectively. Without any particles on the food, your detergent just washes away without any gunk to hold onto. Besides, it can cause damage to your dishware overtime. 

However, this doesn’t mean you should toss a whole bunch of leftover pancakes on the plates into the dishwasher. Your dishwasher is not your garbage disposal if you don’t want to end up with a clogged dishwasher.

Therefore, scrap off any gunk of food or leftover from your plates and put it into the dishwasher without rinsing. However, to prevent any particles from clogging up the drain, clean up the dishwasher filter at least once a month. This is quite simple, all you need to do is to remove the filter and clean it with hot soapy water. This is important for the proper functioning of the dishwasher and to prevent grime buildup. 


Do you need to rinse dishes before the dishwasher at any point in time?

Just like anything, there are always exceptions to the rule. If you have left your dishes for hours or a day before washing, and they are coated with stubborn carbs and protein such as eggs or oatmeal, then, a pre-rinse makes sense. Moreover, it is only reasonable to also soak up a casserole with burnt food particles for a while before loading it into the dishwasher. 

Other than that, it is best to save yourself the elbow grease, water and energy by leaving the fate of your plate in the hand of the dishwasher to handle. They do the best job. Trust me!

Benefits Of Repairing Appliances Over Replacing Them

benefits of repairing appliances

Repair or replace, which way? Many homeowners have found themselves caught up in this dilemma when their appliance breaks down or stops functioning at its best.

Home appliances are what make our lives easier, simpler, and comfortable. It’s definitely something we can’t do without a day (not even in hours). And while you might be tempted to rush to the nearest store for a replacement, repairs might be what you need to get your appliance up and running. Plus, you do not have to break the bank! Here is why repairing a major appliance is a sure bet rather than purchasing a new one. 

Saves money on Appliances 

repairer appliances and save money

Not only is the cost of a new appliance expensive, but there are also other things to consider such as the installation fee, and the shipping and handling costs. Not to mention the wire upgrading, cabinet renovations to accommodate the new appliance, and other hidden costs.  

Repairing however might only cost you a tiny fraction of what replacement will. What is the point of replacing a faulty dryer when what is required is a belt that costs less than $10. Moreover, your home appliance is still relatively new and you are yet to exhaust the lifespan. Appliance repair near me is only a google away to give your appliance the best service and touch required. You can always save that extra money on other pressing needs.  

Repairing Appliances Can Save time  

Saves Time

Who wants to go through the hassle and troubles that come with purchasing new home appliances. And while many homeowners think buying a new one will save time. This is not always true as there is a lot of research and homework to be carried out before making a buying decision. This means you will need some time checking out different models, prices, styles, finishing, and a lot more. Not to talk of looking out for reputable professionals to get the appliance installed. 

However, repair doesn’t cost you much both in money and time. All you need to do is to ring an appliance repair near me, schedule an appointment and they will be right there at your doorstep. Besides, you do not have to go through the hassle of taking your appliance to their repair shop. 

Boost energy efficiency of  Appliances

Saves Time

Even minor faults in appliances can make it run more than it is required which lowers the efficiency and consumes more electricity. For instance, a refrigerator that refuses to be well-closed uses up more energy to maintain the internal temperature. Simple and affordable repairs or constant checkups will be useful to ensure your appliance becomes more energy-efficient and help cut down utility bills. Moreover, your appliance repair technician will be able to catch other little defaults that might pose problems in the long run. 

Increase longevity of Appliances

repair appliances and increase longevity

As said earlier, repairing also helps you to expand the lifespan of your appliances especially when you haven’t used them for a long time. If you have only used it for like 5 years, that means the appliance still has around 5 years or more to use. Hence, it doesn’t make sense to give up on it yet.

Moreover, if the appliance has been functioning properly before the breakdown, repair might be what you need to get it back on its feet. And if repaired properly with constant maintenance, the appliance might even go a decade working perfectly. This way, you can get to enjoy your favorite appliance more. 

Protect the environment 

Repairing appliances also help in protecting the environment. This is another factor to put into consideration when you are deciding between repairing an appliance or getting a new one. Americans generate around 7 million tons of e-waste, and only 2 percent make up the trash in the landfill. While a minute fraction is being recycled. Those appliances are pretty hefty things to jet into the dustbin or leave to constitute a nuisance on the landfill.

With repairing, not only are you less wasteful, but you are also helping in preserving the environment. Not only that, there are a lot of processes that go into mining, manufacturing, and shipping to store. All these can contribute to carbon footprints. Hence, repairing appliances is a way of showing love to the environment.  

Sooner or later, one has to deal with problems that come with home appliance usage. Getting it repaired is a good option that makes economic sense and can also help expand the appliance lifespan while protecting the environment. A good rule of thumb is to get an expert in the field to get the repairs done.

How to Clean a Dishwasher in 5 easy steps?

Clean Dishwasher in 5 easy steps

Dishwashers are one of the most used household appliances. It is also one of the appliances we often take for granted and forget it also needs a thorough cleaning and extra care. Cleaning your dishwasher will help remove any grease, build-up of food particles, and unpleasant odors. It also prevents clogging of the dishwasher filter, gets rid of any bacteria, and improves its performance.  Here are tips on how to clean your dishwasher. 

Clean it’s exterior 

How to Clean a Dishwasher - The Home Depot

Nobody wants fingerprints stains or grease on the exterior of their dishwasher as it makes it dirty and unattractive. To make it clean, soak a clean cloth in warm liquid soap and use it to clean the plastic surface of your dishwasher. After that, dry it up with a clean towel. And if the exterior of your dishwasher is stainless, go for a stainless clean.  You can also use vinegar. Put one part of vinegar inside a spray bottle and mix it with the third part of water.  Spray it on the surface and dry it with a towel immediately. This will help remove every dirt.

Clean the filter

How to Clean the Filter in a Dishwasher |

We are all guilty of not rinsing our plate thoroughly sometimes before putting it on the dishwasher. This adds up over time and can clog the filter. The filter will either be a removable screen filter or a detachable one at the bottom. Unscrew it and remove every food particle inside it. This is achieved by first soaking the filter in warm water filled with detergent for about fifteen minutes. Do you still notice any food residue? Take a scrubbing brush and use it to gently scrub off any residue that remains. Rinse out the filter thoroughly and put it back in the machine. 

Clean all the accessories 

19 Unusual Items to Clean in the Dishwasher - Bob Vila

One of the best ways to clean your dishwasher is to be sure to clean all its accessories. This improves its performance and makes it last longer while preventing it from germs. Remove all the dishwasher racks and wash them in warm water with liquid soap. Use a scrubbing brush to remove any food debris on the utensil holder. Rinse them out in running warm water and return them to their position. 

Deodourize with vinegar

How to Clean a Dishwasher With Vinegar | HGTV

Vinegar is a natural antibacterial found in the pantry of most homes. It is the best remedy for unpleasant odors and discoloration that are found in dishwashers. Put a bowl filled with two cups of white vinegar in the bottom rack of your dishwasher without any washing powder. On your dishwasher and let it run a normal circle. for awhile.  You will get a fresh-smelling, grease-free, and shining dishwasher.

Rinse out with baking soda

How Clean a Dishwasher

Baking soda is not only an antibacterial, it is also a deodorant which is the perfect addition to your cleaning process. Give your dishwasher an extra cleaning and love by sprinkling baking soda on the bottom of your dishwasher. Leave it overnight and run a hot water cycle with it in the morning. This makes your dishwater sparkle, and free from any bad smell and grease. 

How To Repair Your Washing Machine


It’s your laundry day and you get up, pack your hemp of dirty clothes, and head over to your laundry room. You carefully separate your clothes, put as many as possible inside your washing machine, add some detergent, and press the start button. Alas, nothing happens and suddenly you realize your most important home appliance has just failed you. Washing machines are one of the most common household appliances. In fact, they are the best modern household invention serving us for decades. When, however, you come home to a damaged Samsung washing machine, this can be disheartening but for a one that works every time, it’s not a surprise that it breaks down occasionally. The good news is it can be easily repaired by the owner with simple tools or you can contact Samsung repairs in New City NY for professional help.

Many things can lead to washing machines’ poor performance or permanent breakdown. It ranges from too much detergent, a problem with the lid switch or motor drive belt, machine overload, to a clogged drainage system. The unlubricated tub bearing cracked pump and belt, clogged machine pump might also be the culprit. Repairing your washing machine may seem stressful, but with the help of Samsung repairs in Saddle River NJ, it’s actually pretty easy. There is never a good time for your washing machine to stop working and taking action immediately can prevent small problems from developing into something big. Read on as we take you through how to detect and repair a faulty washing machine.

The Washing Machine Won’t On

If your washing machine does not respond when you turn it on, check the power socket. Use a multimeter to check if power is flowing into the washing machine. If the washer is not getting any electricity then you need to check your house panel board to see if there is a problem with the circuit breaker. The washing machine lid switch or motor might also be the problem. When the motor is overheated, the machine often shuts down for some time to cool off before it starts again. However, consistent over-heating might lead to a permanent breakdown of the machine washing.

Machine Drainage Not Working

Drainage problems in washing machines are often caused by a simple clog in the drain hose and drain pump which can be solved by removing the drain hose and using a garden hose to flush out all the blockage. A broken impeller blade or foreign objects such as a pen, sock and many more can lodge in the drain pump which reduces the washing machine’s ability to drain clothes and can block it permanently. In most cases, the drain pump needs to be replaced with a new one. Detergent overload also prevents the washing machine from draining properly. Therefore, it is important to always read the machine’s manual to know the amount of detergent that can be used in one wash.

The Machine Will Not Agitate

Many things might prevent the washing machine from agitating. Overloading the machine or uneven distribution of clothes in the washer makes it imbalanced and not spin properly. Remove some of the cloth or try to distribute the cloth evenly in the machine. A faulty lid switch and drain pump will also prevent the washer from agitating and should be replaced immediately. You can contact Samsung repairs in Saddle River to help you replace your machine lid switch. A worn-out belt or damaged motor might also be the culprit. If you notice one of the machine belts is worn out, replace it with a new one.

The Washing Machine Is Noisy

A noisy washer gives a different sound and it’s often caused by several reasons which include:

  • Clicking sound: This indicates that an object such as a coin, pen, and others block the machine drain. Check your drain and remove the object.
  • Bubbling sound: A bubbling sound is an indication that something is obstructing the machine drain line but it’s not strong enough to clog the machine hose. Remove the material before it increases and finally clog the hose.
  • Humming sound: A humming sound occurs when the machine drain pump is clogged by foreign objects. You may need to replace the pump if the damage is serious.

The Washing Machine Is Unstable

Replacing your machine on an unleavened floor can make it shake while spinning. This can be fixed by putting plywood under your machine to balance it. Overloading your machine and uneven distribution of cloth can also make the machine to be off-balance. Check the machine’s manual to know the recommended load size for the cloth to move freely inside the machine.

Machine leaking water

Leakage around the machine door seal can result in leakage of water in the machine. To solve the problem, carefully clean the door seal or replace it if damaged. A build-up of mineral deposits or faulty water inlet valves can also be the problem. You can call Samsung Repair in New City NY for professional help if you find it difficult to replace your machine door seal or water inlet valve

Top 5 Tips For When The Washer Won’t Run


So let’s face it, when we’re stuck with house chores and appliances don’t work, it seems like a day off. Only to realize, you’ll have to wear the same dirt shirt to the board meeting for the third or fourth time this week! Good luck with that! But to make sure you don’t show up in smelly, gross clothes, Appliance Repair Medic helps you to find out about your washer’s issues as much as you can, easily.

1. Check to be sure the washer is plugged in. This seems so simple, but repairmen get paid when that’s all it takes to make an appliance work. Plugs can get bumped loose by animals or fallen objects. If that doesn’t work, move on to the next item to check.

2. Once you’ve made sure the washer is properly plugged into the electrical outlet and it still won’t run, it’s time to check your central home electrical box to see if a fuse has blown or a circuit breaker has tripped. You may be able to replace the fuse or turn the breaker back on. If this happens frequently, call an electrician immediately!

3. If you’ve established electrical power, the next thing you need is water. Be sure the water valves are open. You should have two valves: a hot and a cold. They may be marked or signified by a red/blue knob or switch. Even if you always wash in cold water, some washers won’t operate unless both valves are open. If your machine is getting water but it fills very slowly, you may just need to open the valve more. A simple cleaning may do the trick to get your washer working again.

4. Loud noises occur usually if the washer has been loaded improperly or the laundry has shifted during the cycle. If the thumping occurs during a cycle (usually the spin cycle), simply stop the machine and redistribute the wet clothing. If your washer is making squealing or screeching noises, this indicates an internal mechanical problem that will require a service call. If after rebalancing the load of wet clothes the washer is still noisy and vibrates, the washer is now off-balance. You must take steps to level the washer, or it will never be quiet and further damage can occur.

5. Check if the washer’s hose connections to the hot and cold water valves. Use a dry hand or a paper towel to run down the length of each hose. If you find any dampness, tighten immediately. If the hose appears to have small splits, replace immediately. A burst water hose is a huge mess and damages walls and floors. Washer hoses should be checked and replaced regularly to prevent this problem. Pay attention to where the puddle is located, whether in the front of the washer or back of the washer. The location will give you a hint as to what to do next.

Tip 6: Clothes Are Too Wet After Final Spin Cycle

If your clothing is still quite wet after the spin cycle, first check to see if the drain hose is kinked or crushed. If your washer “dances” during cycles, it may have moved and kinked the hose. The water pump may be clogged with lint or a small object. If the pump isn’t allowed to work freely and properly, the water drains out too slowly and leaves your clothes wet. Clean it out (this does not require removing the pump). Even a little lint can slow the draining. If that is not the problem, the drain hose could be clogged with lint or hair. It can easily be cleaned with a thin, long-handled brush. Pet shops carry the brushes to clean aquarium tubes if you can’t find one at the hardware store.

Tip 7: No Clue What’s Wrong with the Washer

You know that manual you threw away without a single glance at it, the one you practiced your signature on or the one you took phone numbers down on? Yeah, that one. Get it out and read it! You may just find the answer to your question. If you don’t have the manual, visit the manufacturer’s website or one of their official sites to download a manual for your specific brand and model. It may take a little time but it’s much less expensive than a repair call.

Hopefully, these tips could help you. However, if the washer still doesn’t work, we suggest you give it a smack on the head! Actually, no, that only somehow works for remotes. But, if you ever want to get your washer repaired in the company of some friendly professionals, we suggest you head straight to Appliance Repair Medic in NYC! Have a great day!

Repairing Your Sub-Zero Refrigerator

sub-zero refrigerator

Sub-zero refrigerator is one of the most preferable refrigerators by most culinary pros and budding foodies across the globe. With their top spot in the kitchen appliance industry and great experience in good design and high efficacy, all you can expect is a good quality refrigerator with high performance. But the truth is, even kitchen appliances with guaranteed reliability and perfect design such as sub-zero refrigerators are always at risk of malfunctioning from time to time.

It’s no surprise many sub-zero refrigerator owners get frustrated when their refrigerator fails to work. Fortunately, while some are due to a natural cause such as mechanical wear and tear others might be a minor issue you can sort out without the help of a professional. With that said, here are tips on how to repair your sub-zero refrigerator.

Condenser Not Working

Every refrigerator has a condensing coil which is often installed at the back of the refrigerator or its bottom. These coils are used in cooling and condensing the refrigerant and when they accumulate dust and dirt inside the condenser coil, it won’t generate heat efficiently. This makes it overheat,  cool unevenly, or breakdown completely. To solve this problem, switch off the refrigerator power, unplug it, and allow the condenser to cool down. Use a vacuum cleaner to remove all the dust inside the condenser coils and clean the coils with a cloth and warm water. If the problem continues, the condenser pump or fan might be faulty and you need to call Sub Zero Refrigerator Repair in Saddle River NJ to help you replace the pump or fan.

Leaking Refrigerator

Your sub-zero refrigerator might start leaking if its door gasket is broken or the drain is faulty which is often frustrating. To detect the problem, check if the door is dirty, clean it with soap and water. But if the door is worn out, you will have to replace it. Also, take a look at the draining pan to see if it is broken or full. If it is full, empty the pan and if it is broken you will need to buy a new one. Your built-in refrigerator water dispenser might also be the culprit. Check if there is a disruption in your dispenser or if your ice maker is leaking. If the leaking continues you might need to contact sub-zero refrigerator repair NJ for professional help.

Noisy Refrigerator

A noisy refrigerator might be caused by improper leveling of the refrigerator therefore first check if your refrigerator is improperly leveled and adjust it to the appropriate level.

Thermostat Not Working

Every sub-zero refrigerator comes with a well-designed latest technology thermostat and when it fails to work it can affect the operation of the entire refrigerator. The thermostat orchestrates voltage distribution to other compartments in the refrigerator and without it, they will not receive the right information or signal. To check if your sub-zero thermostat is faulty, go to its setting and turn it from the coolest to the warmest temperature. If you hear a click sound and your fan starts working it means the thermostat is in a good condition if not, it’s time for a certified Sub Zero Refrigerator Repair in Saddle River NJ to come and inspect your refrigerator.

Overworking Refrigerator

Overstuffing your refrigerator can make it run in noticeable high cycles as it will need more time to circulate cool air. it can also happen when your compressor is malfunctioning. To solve the problem, limit the items you put inside your refrigerator. You can also read the sub-zero refrigerator manual to know the recommended items you can put at once. Do not ignore the problem as it can lead to more damage to your refrigerator component and also increase your power cost.

Freezer Not Cooling

Do you notice the item in your freezer spoils faster than usual? This might be a cooling problem and it can be due to the evaporator, thermostat, or condenser coil malfunction. Your freezer compressor or condenser fan can also be the problem. Get a sub-zero repairs NJ expert to help you detect the problem and also solve it.

Compressor Not Working

The compressor is one of the most essential compartments in the refrigerator therefore, it is faulty, your refrigerator will not be cooling and automatically stop working. Fortunately, this rarely happens in a sub-zero refrigerator however, if it happens you might need to contact a sub-zero repair NJ for a replacement.

Refrigerator Always Freezing

A damaged defrost system or faulty condenser drain clog can make a sub-zero refrigerator freeze from the inside every time. The thermostat can also be a problem but can be fixed easily. Reset the thermostat by switching it to the right temperature. If the problem continues, your refrigerator thermistor might be the problem and you need professional sub-zero repair to replace it.

How To Repair Your Cloth Dryer

cloth dryer

A cloth dryer is one of the most important appliances in the home used for drying cloth. They are often lightweight, simple to operate, and saves you the stress of spread drying your cloth. Hence, making sure you have a dry and nice smelling cloth to wear to your work, school, and other important places. When your cloth dryer stops working, you might end up with unwashed piled-up cloth which is not only dangerous to your health when repeated but can also create an unpleasing smell in your home. Fortunately, with the right tools and safety measures, cloth dryer problems can be easily fixed at home by anyone without the help of a professional. While some can be done without opening the cloth dryer, others might require disassembling and reassembling its body which requires the proper knowledge and know-how of an expert. Here are some cloth dryer problems and how to fix them. 

The Cloth Dryer is Noisy

Cloth dryers make noise for different reasons therefore, to identify the problem, you need to first recognize the type f noise your dryer is producing. 

A peeping noise: A peep sound indicates a fault in your dryer’s roller drum bearing which can be stopped by lubricating or replacing it. The bearing is a small rubber wheel and is found within the machine. It can be accessed by opening the dryer at the top and sliding the drum forward. If the noise continues, call a repair top-loading washing machine close to you. 

A high squealing sound: A screeching sound might be due to a faulty idler pulley and need to be replaced. The idler pulley is used to regulate the drum belt tightness. The friction that occurs when the idler pulley is too tight or loose leads to the screeching sound. 

A thumping sound: If a dryer has not been used for a long time, the drum roller rubber often becomes flat leading to unsmooth spinning when the drum rotates. Also, the round drum consistently gives a thumping sound every time it reaches a flat area. The sound can be stopped by replacing the rollers.

A screeching noise: This can be caused by a damaged or worn dryer glide. A glide is a plastic, inexpensive part of a dryer that guides the drum movement on the drum rollers. The dryer glide often wears out after some time therefore, should be replaced as it can not be repaired. To access the dryer glide, remove the bulkhead of the dryer. If the sound persists, search online for washing machine repair near me and talk to them about your cloth dryer noisy sound. 

Dryer Drum Not Spinning

A broken motor, worn out or broken d rive belt can stop the thumbing of cloth in a dryer. The motor and drive belt are inexpensive can be easily replaced. Unplug the dryer and remove its rear panel to check if the belt is worn out, replace the drive belt if has worn out. After replacement, if the noise continues, then the motor is broken. You have to contact a professional clothes dryer repair in Saddle River NJ to help replace your dryer motor. 

Cloth Won’t Dry

After putting your cloth in a cloth dryer, you come back to check them only to realize they are still wet after several complete cycles. This can be caused by a damaged heating element. The dryer will still spin and complete its circle when the heating element is faulty however, it won’t be hot enough to dry the cloth. Also, overloading the dryer, poor ventilation, and a dirty lint screen can speed up the wearing out of the heating element. The heating element can be replaced by unplugging the dryer and removing the connection and its back panel. Contact professional clothes washing machines repair in Saddle River NJ to replace your heating element as they have more experience and are safety cautions. They also know the right model for your dryer.

Cloth Dryer Breaks Down

When you start your dryer and it doesn’t on, it might be due to a bad door switch or broken plunger. The dryer’s door often wears out but constant slamming can speed it up. Contact washing machine repair Saddle River, to help replace your dryer’s plunger. Inadequate electricity or unplugged cords might also be a problem. Check your dryer socket and make sure your electricity is not tripped off. 

Dryer Vent Not Working

This can be due to improper working of the vent cap, or the vent tube is filled with rigid metals or aluminum foils. This can be removed by cleaning the vent tube with a shop vacuum or replacing the entire vent. Clogged lint within the dryer or broken lint filter can also be the culprit. Replacing the dryer filter and unclogging the lint by contacting a  professional Clothes Dryers repair in Saddle River NJ 

Why You Need to Hire a Professional for Appliance Repair Services

Home appliances are great technologies used in the house and are designed to help reduce stress in the home. It’s no surprise that many people are more dependent on those appliances now than ever. Unfortunately, it is often difficult to prevent them from damaging, and sadly, they stop working when you need them the most.  Therefore, it is important to seek professional assistance from home appliance repair services rather than doing it yourself. 

Contacting a full-service appliance repair will prevent you from stressing out because you know your appliance is in good hands and will up and running in no time. Moreover, you are rest-assured, it won’t be breaking down only after few months of usage causing you other trips to home appliance services. If you are the DIYer one, you might as well put down those skills when it comes to home appliances and let the expert perform their magic. Here are some reasons to convince you to contact a professional home appliances repair service for your home appliance.  

It saves time

We all have our schedule and our time is very important to us. Fixing your home appliance yourself takes a lot of time and you might end up damaging it. An expert will access your appliance and quickly repair it. They also have the essential tools and parts needed for the repair. This will save time and allow you to spend your precious time with your loved ones.  

You get the best result

Fixing your home appliance yourself will only give you a temporary result and the problem will start again after some time. Hiring a professional is the best option. They know what they are doing and always make sure the problem is resolved permanently. This makes your appliance work effectively thereby, reducing your workload in the house. Also, professionals have spent many years developing their skills therefore, they provide optimum customer satisfaction. 

They give you a warranty

Using the DIY method to fix major appliances in the home such as washing machine, dishwasher, refrigerator, and many more can void your warranty if you end up not being able to fix the problem. Also, fixing the problem temporarily results in a total waste of money and time because the problem will resurface after a few days. In most cases, you need to completely replace the part. A professional full-service appliance repair gives you a warranty over the repaired part. And if anything happens to the appliance, they will take care of it immediately. 

It is safe

Most of the home appliances use electricity and have components that break because of electricity issues. You can put yourself in danger such as electric shock, cuts, fire outbreaks, and many if you are not trained to repair such appliances. Home appliances repair services are trained professionals who know what to avoid to prevent dangerous situations. They have great experience in the field therefore, they can be trusted. Also, never try to repair something you do not know about because it can lead to injury. Your safety is important. 

It is convenient

Not only is it safe to hire a professional home appliance repair services, but it is also convenient. Doing it yourself will cost you several hours as you need to first troubleshoot the problem and then look for the best way to resolve the problem. It can also lead to frustration especially if it’s your first time handling such repair. But hiring a professional saves a lot of effort and you are confident about the result.  

It saves money

When your home appliance stop working, it does not necessarily mean it needs to be replaced. It might just need to be repaired and replacing some missing or damaged parts can restore it. This saves you from purchasing a brand new one.

Tips on Maintaining Your Dryer


The dryer is one of the most important and useful appliances in the home. Having a failed or dirty dryer can be a huge nuisance. You will either take your bucket full of cloth to dry outside on the line after washing or to a laundromat near you. You probably won’t find any of these options fascinating. This is why it is very important to take care of your dryer and make sure it serves you continuously. If you are like many people that know nothing about dryer maintenance or the ones that live in an apartment where the landlord takes care of issues involving appliances, you probably won’t border about it until you get yours. 

Fortunately, we are here to help you out. You can learn everything you need without stress. And if things get out of hands, call appliance repair service near you, using the appliance repair free service call. Whether you are using a full-size dryer or the combination of both washer and drying, here are tips on maintaining them. 

Read the dryers manual

Manuals are added to every appliance to guide users on how to use them. The manual serves as a primary guide on the installation, load size, and maintenance of the appliance. Following the dryer maintenance manual will educate you on how to use and maintain it. It also makes you avoid breakdown or damages of your dryer. And if you have lost your manual, you can access it online through the company’s website. 

Avoid dryer overload

One of the major causes of dryer breakage is overloading. Every dryer has a minimum capacity. Learn about yours from your manual. Overloading your dryer increases the lint in the lint trap which obstructs the flow of air in the dryer. It also overworks the dryer which often overheats the motor of the dryer. This can result in the dryer burnout. Furthermore, large loads take longer drying time which results in more energy consumption. Plus, it affects the pulley assembly and also harms the dryer’s belt. 

Clean the lint regularly

Continuous use of dryers without cleaning can lead to lint build up on your lint trap which can damage your dryer or lead to a fire outbreak. It is important to make sure it is clean every time you use it.  And you can clean your lint once in a year with a vacuum cleaner. If you cannot do it on your own, appliance repair near me is just a stone throw. Call them and they will help you out with the cleaning  

Change the ventilation duct

Dryers ventilation ducts are often made of aluminum or plastic to make its changes easy and flexible. The duct is not expensive, easy to install, and it is available in your nearest store. A plastic ventilation duct when overheated can damage the dryer. Research has shown that many fire outbreaks in the house involve the washing machine. Therefore, you need to be careful and always replace your ventilation duct. You can also replace it with a metal duct and this can be easily done by a dryer repair service NJ.

Make sure your dryer is stable during use

Dryer instability often leads to improper distribution of load. It can also cause a dryer to fall. Why? Because the unstable position of the dryer causes uneven wear of the machine. This problem can be easily solved by putting your dryer in a flat position or support it underneath with a suitable wood. The manual can also guide you on what to do.

Avoid putting anything in the dryer

Dryers are designed to dry only fabrics and nothing more. Many people put the wrong things such as shoes, wigs, toys, and many more in the dryer. This often damages the dryer. Also, make sure the vent of the dryer is always close when it’s not in use. 

Bottom line

Dryers are estimated to last for 10 years and even to 25 years if maintained properly. However, many users often have problems with their dryers within five years of purchase. We all purchase drying machines with the mindset of lasting for a long time, it is frustrating to take it to the dryer repair services within a year of purchase.  Therefore, it is necessary to always clean and maintain our dryer regularly to keep it safe and effective. Constant use of the dryer often results in lint build-up in the lint trap which can make the dyer ineffective and prone to fire. hence, always clean your lint filter and wash out any spills. Also, clean the vent of your dryer at least once in a year. However, if you notice any issue with your dryer, you can call dryer repair service NY. They are professionals that will put in their expertise to get your dryer up and running.