Tag Archives: gas oven repair service

Oven Repair: To DIY or Hire a Professional Service

oven repair

Ovens, refrigerators, or whatever appliances it is are there to make life easier and a mere breakdown of any of these can alter the day’s activities. So your oven stopped while preparing dinner or you have a guest coming over the weekend and your oven wouldn’t just cooperate, it happens. The question is, should I call an expert or should I put my DIY skills to good use? While some might only require a simple cleaning of the oven or a simple check on the power supply, others might require the magic hands of an oven repair service to get it done. Moreover, getting it done yourself sure saves some bucks but some might be quite dangerous to handle alone. A call through oven repair in Rockland County will save you stress, time and danger.

When to DIY?

Some basic oven problems do not require an expert. It might simply be cleaning the panel of the oven or checking out the plugs. Here are some oven repair problems that can save you some money. While at it, ensure you have the required skills, knowledge and the confidence to approach the problems and get the oven repaired. A rule of thumb never attempts to repair the oven without disconnecting the oven and turning off the gas in case of a gas oven.

Crazed oven glass door

This might be as a result of poor maintenance. To do this, remove the glass door, prepare a warm water and soap solution, soak a dishtowel inside and clean it up. Leave it to dry and use glass cleaner to wipe it. When dried, put the door back.

Oven door refuses to open or shot

For a door that refuses to open, switch off the oven and allow it cool off for a while. If the door won’t budge, it’s time for self-cleaning. Try a self-clean cycle of 15 mins, leave it to cool off and try opening the door again.

A door that refuses to shot can lead to heat loss which can lead to injury. If you are using a gas oven, turn off the gas before repairing the door. Remove the door to see if the hinges are the source of the problems. If the hinges or springs are old, replace them with new ones. If the problem persists, contact a gas oven repair service.

An oven that will not heat to the right temperature

Each time you cooked or baked, your cakes always appear undone or your food always get overcooked, the temperature might not be correct. This only requires pressing some buttons and a user’s manual is your friend.

The problem continues, you might be having a damaged temperature sensor that needs to be replaced. If all these don’t work out, it requires an oven repair service.

Why you need to hire a pro?

  • You cannot figure out the exact problem of the gas oven.
  • Some problems appear simple but there are hidden problems that are life-threatening. You don’t want to put the life of your loved ones at the mercy of a simple mistake.
  • An oven you forgot to put off while rushing to run an errand might have gathered up electricity which might shock you
  • An inexperienced repair of home appliances can cost you more money. You might have caused more harm than good while trying to fix the problem.
  • Oh… you think your oven just stop self-cleaning? There might be something more.
  • Health, life, and safety overall!

When to hire a pro?

You need a professional oven repair in Rockland County when this happens to your oven.

The oven light is not coming up
If it is just a problem with the bulb, this can be replaced just as easy as you replace the house bulbs. However, if this does not seem to work out, it can be some electrical issues, damaged light switch or connecting wires. Sounds dangerous? Contact an expert in oven repair in Rockland County.

An oven that stops self-cleaning

Ensuring the oven door is shut tightly is one way to averse this problem as an oven will not self-clean if the door is not properly locked. However, if the problem persists, then it can be a faulty door lock system, temperature sensor, damaged control board, clock failure and a host of others. This requires the work of expertise and should not be handled by yourself.

An oven that refuses to turn on

Need to bake some goodies and your oven won’t just come up? Culprits might be a faulty fuse, temperature sensor, the heating element and a host lot of others that a DIYer might not know of. An electric oven repair cost is nothing to the electric shock and the danger involved in getting it done.

Moreover, if yours is a gas oven, either the gas valve, igniter or broken wire is to be held responsible. Contact an experienced gas oven repair service to get it done without hassle.

Having any problem with your appliances or your oven still, seem not to work? Appliance Repair Medic is just a phone call away for all your oven repair in Rockland County.

Here’s what to Check When Your Oven Isn’t Heating

Oven Repair Services

Today, the oven has taken a renowned place in the modern kitchens. It is a versatile appliance which makes the cooking easier as well as fast. But what happens when this household apparatus suddenly stop heating. Any sudden breakdown halts your regular work and you need immediate oven repair services in NY.

In this article, Appliance Repair Medic team of repair technicians has given some tips if you want to check your oven yourself. While working with electric wires always make sure you are using proper procedure. Furthermore, you should have necessary qualification to do an apparatus repair.

What you will need

You should have owner’s manual and a multimeter in order to conduct a few tests. The multimeter read the amount of voltage or ohms that is traveling via wires.

Things to consider before oven repair troubleshooting

You should always consider your safety before struggling a repair on an appliance. Hence, remember before you start oven overhaul, you have to detach the power by plugging out the electrical power cord of the outlet. Moreover, you should wear defensive gear earlier beginning any work on any appliance. Now you are ready to start repair

Here are a few things you should check if an oven is not heating:

1) Bake Element:

You should start with bake element because this is a common cause, the household appliance is not heating appropriately. Bake element is a heating element that is located at the bottom of the oven. Most of the ovens use both the bake as well as broil element in bake cycle.

You should start oven repair services in NY with these elements as they perform 90% of heating. Hence, do a visual check of bake element in order to determine whether the element is defective. If bake element is not working, there is a need to replace it. Also, if bake element is OK then there is a need to check the bake circuit to detect any cause.

2) Oven Temperature Sensor:

Most ovens have a temperature sensor to monitor the temperature of apparatus continually. The sensor sends a signal to electronic control to either turn ON or turn OFF the element.

If the sensor is not working properly it can be the reason why oven is not producing heat. Hence, during oven repair services in NY do not forget to check the temperature sensor. If you find any issue with the sensor, then there is a need to check the resistance with a multimeter.

You can replace it if you find the sensor faulty. Moreover, some oven uses temperature sensing bulb for controlling the temperature. You have to make sure this bulb is not loose.

3) Check Gas Oven Ignitor:

Is your gas oven not heating correctly? If yes, then you should check for the bake ignitor first. You can find ignitor at the back of oven compartment and have to remove it by unbolting from the oven floor.

Use multi-meter while performing gas oven repair service to detect the continuity of power. The multimeter should register between 0 to 1100 ohms. And if not then it means igniter has lost continuity and need replacement.

4) Oven Control Thermostat: 

The thermostat is placed in the main control panel and it controls the bake as well as broil element. This temperature controllable switch supply power to these elements. And a broken thermostat can cause the oven to produce little or even no heat at all.

Do not forget to remove the power to household appliance earlier performing oven repair troubleshooting. Also, if the brake and broil elements are not receiving power, then you should look for the proper contact of the thermostat for continuity with a multi-meter.

5) Fuses:

If your oven contains internal fuses, the wiring problem can cause the fuse to blow. A blown fuse indicates that component has failed. The ovens that use fuse shows a sign of the circuits that are pretentious by the particular fuse.

If you find oven fuse blowing during oven repair services, then there is a need to inspect the oven element. Also, inspect the allied wiring in order to determine the cause before replacing the fuse. Remember, do not change the rating of fuses.

6) Oven Require Calibration: 

There may be the reason behind not proper heating is that oven is not calibrated. Actually, this will also help with ovens that run too hot. The calibration dial is present on the back of the temperature knob or at the bottom of the small shaft. You can easily find adjustment screw on the dial.

You have to turn the screw counterclockwise in order to increase the temperature and opposite to decrease the temperature. In fact, some oven repair services in NY need half turn to increase or decrease the temperature by 25 degrees.

7) Bad Relays: 

This is also one of the reasons that prevent an oven from heating appropriately. An oven has two heating elements possibly has two relays. The relays can burn out with the time. You can check the owner’s manual for instructions and can also contact a professional for fixing a problem.

Also, Read Washing Machine Repair Services – 3 Tips to Choose the Best Service

Wrapping Up
Some problems are easy to detect while other minor issues are not easily identifiable. If you are not able to detect a problem and do not have appropriate knowledge, then contact oven repair services in providers. Appliance Repair Medic is one of the best appliance repair service providers and endows cost-effective and quality oven overhaul services in the New York City.